WIKA Models PGT43.100 and PGT43.160 IntelliGAUGE

Description

WIKA Models PGT43.100 and PGT43.160 IntelliGAUGE Technical Data and Engineering Selection Guide

WIKA Models PGT43.100 and PGT43.160 IntelliGAUGE is supplied by SANTAN for replacement, new projects and complete model-code review. The verified product-family information below supports preliminary selection, installation planning and quotation preparation.

Verified Product-Family Specifications

Measurement principle	Mechanical diaphragm gauge plus non-contact electronic angle sensing
Published starting range	From 0 … 16 mbar for eligible 160 mm configurations
Nominal sizes	100 or 160 mm
Output choices	4 … 20 mA, 0 … 20 mA or 0 … 10 V, configuration dependent
Mechanical accuracy	Class 1.6; optional class 1.0 subject to application test
Overload	Standard short-time protection 5 times span, maximum 40 bar; optional higher factor
Safety design	S3 safety version in accordance with EN 837
Commissioning	Plug-and-play signal transmission; verify supply, wiring and output variant

Published values describe the product family and remain configuration dependent. Final range, accuracy, materials, pressure or temperature limits, process connection, output, approvals and accessories must be checked against the selected WIKA order code and current data sheet.

Best-Fit Application

Use the PGT43 when operators need an always-readable local indication while the same pressure value is transmitted to a control room, recorder or PLC. The diaphragm system suits low-pressure and overload-prone process points where a standard Bourdon gauge may be less appropriate.

Selection and Installation Notes

Select the electrical range and analogue scale together so local and remote readings represent the same process span. Verify supply voltage, load, cable entry, hazardous-area version, EN 837 safety requirement, diaphragm material, process connection and cooling accessories for elevated medium temperature.

Quotation and Selection Data Required

Measurement	Pressure/vacuum range, normal value, overpressure and required indication accuracy
Process	Medium, viscosity, solids, operating/design temperature and cleaning conditions
Mechanical	Process connection, dial size, mounting orientation and available installation space
Materials	Wetted materials, seal/elastomer requirements and corrosion compatibility
Electrical	If applicable: output signal, supply, cable entry, contact or hazardous-area requirement
Compliance	Hygienic, material, calibration, safety, inspection and project documentation needs

Related Engineering Resources

Official Manufacturer Reference

WIKA official PGT43.100 / PGT43.160 data sheet PV 14.03

Request a Quote

Send the complete WIKA model code, quantity and application data to sales@santanfluid.com. For a faster engineering review, use WhatsApp: +86 136 9022 3185 (China) or +62 823 1767 3750 (Indonesia). SANTAN will confirm the selectable configuration before quotation; no online payment is required.

Standard Technical Specification Summary

Use these fields for preliminary selection. Final values depend on the complete manufacturer model code and selected options.

Model	WIKA Models PGT43.100 and PGT43.160 IntelliGAUGE
Measurement Range	Configuration-dependent; confirm the required span and complete model code.
Accuracy	Configuration-dependent; confirm the accuracy class and calibrated range.
Process Connection	Configuration-dependent; confirm size, rating, standard and wetted materials.
Output Signal	Configuration-dependent; confirm analog, digital and communication requirements.
Certifications	Confirm hazardous-area, functional-safety, sanitary, marine or custody-transfer approvals by model code.
Application Industries	Application-dependent; confirm medium, process conditions and industry requirements.

Reviews

There are no reviews yet.

Be the first to review “WIKA Models PGT43.100 and PGT43.160 IntelliGAUGE”