Deskripsi
WIKA Models PGT43.100 and PGT43.160 IntelliGAUGE Technical Data and Engineering Selection Guide
WIKA DPGT40 menggabungkan indikasi tekanan diferensial dengan sinyal keluaran listrik dan tampilan tekanan kerja terintegrasi. Mendukung pemantauan filter, pompa dan kompresor di mana visibilitas lokal dan transmisi sistem kontrol keduanya diperlukan.. Hubungi sales@santanfluid.com atau WhatsApp +8613690223185 untuk konfirmasi model dan penawaran harga. is supplied by SANTAN for replacement, new projects and complete model-code review. The verified product-family information below supports preliminary selection, installation planning and quotation preparation.
Verified Product-Family Specifications
| Prinsip pengukuran | Mechanical diaphragm gauge plus non-contact electronic angle sensing |
|---|---|
| Published starting range | From 0 … 16 mbar for eligible 160 mm configurations |
| Nominal sizes | 100 or 160 mm |
| Output choices | 4 … 20 mA, 0 … 20 mA or 0 … 10 V, configuration dependent |
| Mechanical accuracy | Class 1.6; optional class 1.0 subject to application test |
| Overload | Standard short-time protection 5 times span, maximum 40 bar; optional higher factor |
| Safety design | S3 safety version in accordance with EN 837 |
| Commissioning | Plug-and-play signal transmission; verify supply, wiring and output variant |
Published values describe the product family and remain configuration dependent. Final range, accuracy, materials, pressure or temperature limits, process connection, output, approvals and accessories must be checked against the selected WIKA order code and current data sheet.
Best-Fit Application
Use the PGT43 when operators need an always-readable local indication while the same pressure value is transmitted to a control room, recorder or PLC. The diaphragm system suits low-pressure and overload-prone process points where a standard Bourdon gauge may be less appropriate.
Selection and Installation Notes
Select the electrical range and analogue scale together so local and remote readings represent the same process span. Verify supply voltage, load, cable entry, hazardous-area version, EN 837 safety requirement, diaphragm material, process connection and cooling accessories for elevated medium temperature.
Quotation and Selection Data Required
| Pengukuran | Pressure/vacuum range, normal value, overpressure and required indication accuracy |
|---|---|
| Process | Medium, viscosity, solids, operating/design temperature and cleaning conditions |
| Mechanical | Process connection, dial size, mounting orientation and available installation space |
| Materials | Wetted materials, seal/elastomer requirements and corrosion compatibility |
| Electrical | If applicable: output signal, supply, cable entry, contact or hazardous-area requirement |
| Compliance | Hygienic, material, calibration, safety, inspection and project documentation needs |
Related Engineering Resources
- Pressure engineering guide
- SIL, IP rating and material selection
- WIKA DPGT40 DP gauge with output
- WIKA PGT23 pressure gauge with output
- WIKA PGS43.100 gauge with switch
- Pressure measurement products
Official Manufacturer Reference
WIKA official PGT43.100 / PGT43.160 data sheet PV 14.03
Minta Penawaran
Send the complete WIKA model code, quantity and application data to sales@santanfluid.com. For a faster engineering review, use WhatsApp: +86 136 9022 3185 (China) or +62 823 1767 3750 (Indonesia). SANTAN will confirm the selectable configuration before quotation; no online payment is required.
Ringkasan Spesifikasi Teknis
Gunakan bidang ini untuk pemilihan awal. Nilai akhir tergantung pada kode model lengkap pabrikan dan opsi yang dipilih.
| Model | WIKA DPGT40 menggabungkan indikasi tekanan diferensial dengan sinyal keluaran listrik dan tampilan tekanan kerja terintegrasi. Mendukung pemantauan filter, pompa dan kompresor di mana visibilitas lokal dan transmisi sistem kontrol keduanya diperlukan.. Hubungi sales@santanfluid.com atau WhatsApp +8613690223185 untuk konfirmasi model dan penawaran harga. |
|---|---|
| Rentang Pengukuran | Tergantung konfigurasi; konfirmasi rentang yang diperlukan dan kode model lengkap. |
| Akurasi | Bergantung konfigurasi; konfirmasi kelas akurasi dan jangkauan yang dikalibrasi. |
| Koneksi Proses | Bergantung konfigurasi; konfirmasi ukuran, peringkat, standar dan material basah. |
| Sinyal Output | Tergantung konfigurasi; konfirmasikan persyaratan analog, digital dan komunikasi. |
| Sertifikasi | Konfirmasikan persetujuan area berbahaya, keselamatan fungsional, saniter, kelautan atau kepemilikan transfer dengan kode model. |
| Industri Aplikasi | Bergantung aplikasi; konfirmasi media, kondisi proses dan persyaratan industri. |
Ulasan
Belum ada ulasan.