Deskripsi
SITRANS FMS500 Electromagnetic Flow Sensor Technical Data and Engineering Selection Guide
SITRANS FMS500 Electromagnetic Flow Sensor is supplied by SANTAN for new projects, installed-base replacement and complete model-code review. Use the verified product-family data below for preliminary selection and quotation preparation.
Verified Technical Specifications
| Primary service | Conductive water and wastewater |
|---|---|
| Nominal size | DN 15–2000 (1/2–80 in.) |
| Published velocity range | 0–10 m/s |
| Akurasi | 0.4% of rate standard; optional calibration up to 0.2% of rate |
| Operating pressure | Up to 40 bar, sensor size and flange dependent |
| Liner focus | Water-service hard-rubber/NBR and EPDM configurations |
| Instalasi | Compact or remote system configuration with the selected transmitter |
| System pairing | Pairs with SITRANS FMT020 as the SITRANS FM520 system |
Published values describe the product family and are configuration dependent. Final range, materials, accuracy, pressure, temperature, approvals, communications and accessories must be checked against the selected Siemens article number and current documentation.
Best-Fit Application
Use FMS500 for conductive water and wastewater lines where low-flow sensitivity, large sizes or water approvals are important. Confirm velocity at minimum flow, liner choice, burial/submersion needs, flange standard and empty-pipe risk.
Quotation and Selection Data Required
| Sedang | Liquid or gas, composition, conductivity, density and viscosity as applicable |
|---|---|
| Flow data | Minimum, normal and maximum flow; operating and reference conditions |
| Mechanical | Line size, schedule, connection standard, orientation and available straight run |
| Design limits | Operating/design pressure and temperature; wetted-material requirements |
| Electrical | Power, output/protocol, enclosure and hazardous-area requirements |
| Documentation | Required calibration, inspection, material and compliance certificates |
Related Engineering Resources
- Magnetic flowmeter liner and electrode selection
- Flowmeter installation checklist
- Water and wastewater instrumentation
- SITRANS FMT020 transmitter
- SITRANS FMS300 process sensor
- Flow measurement products
Official Manufacturer Reference
Siemens official SITRANS FMS500 product page and current technical downloads
Minta Penawaran
Send the complete Siemens article number or model code, quantity and process data to sales@santanfluid.com. For a faster engineering review, use WhatsApp: +86 136 9022 3185 (China) or +62 823 1767 3750 (Indonesia). SANTAN will confirm the selectable configuration before quotation; no online payment is required.
Ringkasan Spesifikasi Teknis
Gunakan bidang ini untuk pemilihan awal. Nilai akhir tergantung pada kode model lengkap pabrikan dan opsi yang dipilih.
| Model | sitrans-fms500-electromagnetic-flow-sensor |
|---|---|
| Rentang Pengukuran | Tergantung konfigurasi; konfirmasi rentang yang diperlukan dan kode model lengkap. |
| Akurasi | 0.4% of rate standard; optional calibration up to 0.2% of rate |
| Koneksi Proses | Bergantung konfigurasi; konfirmasi ukuran, peringkat, standar dan material basah. |
| Sinyal Output | Tergantung konfigurasi; konfirmasikan persyaratan analog, digital dan komunikasi. |
| Sertifikasi | Konfirmasikan persetujuan area berbahaya, keselamatan fungsional, saniter, kelautan atau kepemilikan transfer dengan kode model. |
| Industri Aplikasi | Bergantung aplikasi; konfirmasi media, kondisi proses dan persyaratan industri. |
Ulasan
Belum ada ulasan.