الوصف
Endress+Hauser Proline Promass F 300 Coriolis Flowmeter Technical Data and Engineering Selection Guide
Endress+Hauser Proline Promass F 300 مقياس التدفق Coriolis is supplied by SANTAN for industrial flow-measurement projects, replacement requirements and model-code review. The data below is intended for preliminary engineering selection and quotation preparation.
Verified Technical Specifications
| Product root | Proline Promass F 300 / 8F3B |
|---|---|
| Nominal diameter | DN 8–250 (3/8–10 in.) |
| Measured variables | Mass flow, density, temperature, volume flow and calculated variables |
| نطاق القياس | 0 to 2,200,000 kg/h across the product family |
| Maximum measurement error | Liquid mass flow ±0.10% standard / 0.05% option; gas mass flow ±0.25% |
| Medium temperature | -50 to +150 °C standard; option envelopes extend from -196 to +350 °C |
| Maximum process pressure | PN 100 / Class 600 / 63K, configuration dependent |
| Measuring-tube choices | 904L, 316/316L or Alloy C22 by configuration |
These are product-family values, not a promise for every configuration. Final sizing, materials, approvals, accuracy, pressure and temperature limits must be confirmed against the complete manufacturer order code and current technical documentation.
Best-Fit Application
Use Promass F 300 when direct mass flow, density or concentration data is required for liquids or gases and pressure drop is acceptable. Size against the real fluid properties and operating envelope, not only nominal pipe diameter.
Quotation and Sizing Data Required
| Process | Fluid, phase, composition, conductivity/density/viscosity as applicable |
|---|---|
| Flow data | Minimum, normal and maximum flow; operating and reference conditions |
| Mechanical | Line size, schedule, connection standard, available straight run and orientation |
| Design limits | Operating/design pressure and temperature; wetted-material requirements |
| Electrical | Power, output/protocol, enclosure, hazardous-area and functional-safety requirements |
| Documentation | Required calibration, inspection, material and compliance documents |
Related Engineering Resources
- Coriolis vs electromagnetic flowmeter selection
- Industrial flowmeter selection guide
- Industrial flowmeter installation checklist
- KROHNE OPTIMASS 6400 alternative
- Yokogawa ROTAMASS Total Insight alternative
- Flow measurement product category
Official Manufacturer Reference
Endress+Hauser official Promass F 300 product page and December 2025 technical information
طلب عرض سعر
Send the complete model code, quantity and process data to sales@santanfluid.com. For a faster engineering review, use WhatsApp: +86 136 9022 3185 (China) or +62 823 1767 3750 (Indonesia). SANTAN will confirm the selectable configuration before quotation; no online payment is required.
ملخص المواصفات الفنية القياسية
استخدم هذه الحقول للاختيار الأولي. تعتمد القيم النهائية على رمز نموذج المصنع الكامل والخيارات المحددة.
| النموذج | Endress+Hauser Proline Promass F 300 (8F3B) |
|---|---|
| نطاق القياس | Coriolis mass, volume, density and temperature measurement for liquids and gases; mass flow up to approximately 2200000 kg/h by sensor size |
| الدقة | Liquid mass-flow accuracy down to +/-0.05% with PremiumCal; final performance depends on size and calibration option |
| توصيلة العملية | Compact inline sensor with flanged or hygienic process connections selected by nominal diameter and pressure class |
| إشارة الخرج | Up to three I/O channels with HART, PROFIBUS, FOUNDATION Fieldbus, Modbus, PROFINET and Ethernet options; WLAN access |
| الشهادات | ATEX, IECEx, marine, hygienic and functional-safety options; Heartbeat Technology verification |
| صناعات التطبيق | Chemical; oil and gas; refining; food and beverage; pharmaceutical; demanding liquid and gas mass flow |
التقييمات
لا توجد تقييمات بعد.